Monday, April 6, 2009

Pampering the Laptop with a DIY Homemade Notebook or Laptop Cover/Case/Skin/Wrap

I've gotten my very first laptop! It is great to be able to work at the table where the girls do schoolwork. Now I can get my own things done while policing them at the same time. Yeah--if I'm not right where I can remind them about homeschool, they wander off like absent-minded little bees. Now I am right where they are completing their schoolwork and I can blog at the same time.

Owning a large, expensive piece of portable electronics, however, is a little nerve wracking. Admittedly, my Pocket PC (kind of like an iTouch or iPhone minus the phone part) cost more than this laptop did, but I wasn't as nervous about that as the laptop. The laptop, however, is considerably more unwieldy as well as much heavier. I have to take it in and out of my 'purse' (a much more girly-type laptop bag--it's enormous) a lot. And it's not the only thing I keep in the bag. Since I have a one-year old, I often carry baby items, not to mention keys, a Day Runner, pens, cell phone, and other items. I was worried about it getting scratched.


I could have bought a laptop case--one of those padded bags with a zipper that you need to pull the laptop out of everytime you want to use it. Nah! I already hated getting it out of the bag it was in. I just wanted to open it and go. Pocket PCs and Palm Pilots have great cases. Just slip the device in and all you need to do is open the front. All of the functions of the device are completely available and it's very rare the you need to remove it from it's case. I liked that.


I decided to make my own, large, version for my laptop. Here is what it looks like finished:

Here is what the top looks like. Isn't it pretty. Way nicer than those industrial-looking cases. Like the fabric? I really loved this pattern from Jennifer Paganelli's Bell Bottom quilting cotton collection. The larger width of the laptop really gave it enough real estate to show it off quite nicely. Laptop skins are very nice, but I wanted something NOW and something that was more 'me.'







The cover wraps around the laptop like those book covers we used to make in high school. I decided to have a different pattern on the bottom of the laptop. If you'll note, I made sure to cut away the fabric from the vents and from the feet (don't want the thing to slip away from me while precariously balanced on some surface). The sides of the laptop are left uncovered so I can access all of the ports and the DVD tray.




Here is how it looks when the laptop is opened. See? The cover stays on nicely. Notice how well the Bell Bottom smaller-scale print looks on the touch pad area. I love seeing that pretty pattern when I use it. I used elastic at the bottom of the screen and along the sides. I thought about using ribbon, but decided I liked the elastice give and fudge-factor instead. And I didn't have 1/4" wide ribbon on hand.


I hardly dare to call this sewing. Except for the bias binding above the touch pad, putting the two different fabrics together, and sewing on the elastic and tabs (used to hold the fabric at the top of the screen and at the bottom of the touch pad, everything else was done with cutting and Fray Check.

It was my first project on my new sewing table. Needed to break in that new, huge, cutting table and mat and make a cover. How fortuitous! And you're right--two large purchases at the same time. Let's just say some husband realized that I didn't get a decent Christmas, birthday, or Valentine's day presents and was very generous as a result.

I'll include some information about how I made the cover. First I taped a couple of sheets of paper together to use as a template. I taped it in place to cover the touch pad, and with the laptop closed wrapped it underneath and then to cover the top. I held it in place at the top edge while I opened the laptop to figure out where to cut it so it would fold over the top edge without covering the screen. I cut out the length there and then taped that edge to the top edge of the monitor. I also made a cut out for the touch pad and the microphone and headphone jacks. Then I cut the sides to about the same width as the laptop itself. I left a wing at the bottom (next to the touch pad) and a wing next to the top edge of the monitor. These will be folded under and sewn to the other side of the cover to help secure it in place.









My next concern was to make sure I left holes for ventilation and the feet (I didn't want my laptop to slip). The feet were easy to cut around by feel. The vent were more difficult. Remember leaf rubbings? I rubbed a crayon on the paper over the vents and they showed up for cutting quite well.



With the paper template complete, it was time to cut the fabric. Because I was using two fat quarters, I sewed them together (yay, overlock!). I made sure that the center of each design was aligned and then made the seam.


Since I was concerned about the center of the design, I folded my template in half to find it's center. Notice the tabs on the top and bottom. These are the 'wings' we left on the folded over parts to make a pocket.







I lined up the fold line in the center of the paper template with the center of the pattern I selected. I also made sure that the seam of my two fabrics lined up with hinge of the lap top and had a half-inch between it and the first cut. Using one fabric would eliminate that concern. Then I cut around the template and cut out all of the openings for the electronics.

Once I cut out the openings, I test-fit the fabric. I had some adjustments to make. I just used some sharp embroidery shears to fix the openings. I didn't care how big they were, just that they didn't connect into really large openings.

Then it was Fray Check time. I toyed with putting bias tape around each edge, but quickly gave up on that idea. I was in too much of a hurry and I wasn't sure I wanted to worry about the tabs that get folded around.

Because I had a large opening at the edge of the fabric where my touch pad was, I decided to use a bias tape edge binding that would cover the edge and connect the two sides together. Test fit the bias binding first and mark where the edge should connect with the bias tape. I didn't and I ended up with a 1/4" too much bias tape at the opening and it gaps oddly. Yippee for the bias tape foot.

You can see where the bias tape edging goes in this next picture. You can also see where the bias tape lies oddly because of the mismeasurement (um, nice way of saying 'no measurement at all'). The following photo also shows the two tabs that get tucked around the top and bottom of the laptop and hand-sewed (by me, anyway) into place. It's also a good shot of my elastic placement. I had to use elastic "suspenders" to connect the bottom part of the cover to the bottom. If I went around the side, I would have blocked the DVD tray. The elastic at the bottom of the screen is also visible. As you can guess, after sewing the tabs in place, I put the elastic in place and hand sewed it. The elastic was cut about 1/2" shorter than the required length.

What to do better:

The fabric is a bit stretchy. That's partly due to a looser fit, setting one the fabrics on a crosswise grain, and the holes in the bottom fabric. A tighter fit would be easier to accomplish by shortening the template a little bit. Another idea, that would help with getting the case in and out of the bag, would be to sew ribbon handles all the way around, like a tote bag handle. Additionally, it would be a sturdier case if the fabric was interfaced with a heavy weight fusible interfacing prior to cutting it out. My last brainstorm for increasing the cover's rigidity would be to use a netting fabric sewn inside of the cutouts for the ventilation--it would allow the ventilation and keep some continuity of the fabric.

2 comments:

Lidia ZuniReds said...

I love your idea.. thanks by shared it!!!

Success!!

Decalskin said...

Yeah, amazing blogpost as contains complete information on skin cases. I am interested to buy Ipod Nano Covers for my new Ipod. I want skin of high quality with no residue property. Thanks

Itouch Skin Cover